Varilight Screwless LED V-Pro 1 Gang Rotary Dimmer Switch Brushed Steel

• Power Consumption: 120W
• Dimensions: Width=86mm Depth=48mm Height=86mm

Although most modern dimmable LED light bulbs are now designed to work with the majority of common household dimmers, there can be some slight issues.

For example, they might flicker at a certain point on the switch or there might be a slight buzzing sound when the dimmer is turned right down.

This Varilight 1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs) dimmer switch has been designed specifically to be used with low loading LED light bulbs and eliminates the issues mentioned above.

This state of the art dimmer switch incorporates V-Pro intelligent dimming technology, soft start feature and intelligent overload protection, adjustable minimum brightness setting and choice of driving modes.

This low-profile, screwless brushed steel faceplate features a brushed steel knob for a sleek, contemporary style.

This dimmer has a maximum LED load rating of 120w (max. 10 lamps) per gang.

Dimensions: 86x86x48mm

Faceplate Depth: 4mm

Fixing Centres: 60.3mm

Recommended Back Box Depth: 35mm

Operating Voltage: 230v 50Hz

Maximum Current Rating: 1.3A

Terminal (Live) diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) diameter: 3.3mm; Capacity: 3 x 1.5mm²

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers, TRIAC dimmable loads or electric motors.